The parking lot is first prepared by using a combination of brooms, hand held blowers or street sweepers to fully clean from corner to corner. It is vitally important to remove all loose and stuck on debris to ensure proper adhesion of the sealant. All debris is removed from the parking lot and it is now ready for the next step in the process.
Now that the debris is cleared from the lot, any cracks in the asphalt are attended to. First the cracks are routed and cleaned to ensure proper adhesion of the crack filler. Next the cracks are filled with a hot rubberized sealant. We make sure to seal the entire length of the crack to prevent moisture from penetrating the asphalt.
Now that your parking lot has been cleaned and the cracks have been routed and sealed, it is time to apply the seal coating to the entire lot. Canadian Property Stars exclusively uses SWT commercial asphalt sealant for commercial asphalt seal coating projects. We take care to ensure that the product is evenly applied to the entire lot and that the sealant is applied up to all edges – but not over.
Nothing completes the look of a freshly sealed parking lot more than newly painted lines. We can repaint your pre-existing stall lines or we can paint a new set of stall lines according to your specifications. Besides stall lines, accessible parking spots, and directional arrows, other features can be painted. Paint colours and options, up to highway grade, are available.